PLANET FGSW-1602RS - Manual (Page 16)

14 15
Please refer to the tables below:
Link status of the device using Auto-negotiation to the Switch
Switch’s
Speed Adver-
tise setting
Device mode setting
1000M Full 100M Full 100M Half 10M Full 10M Half
1000M Full* 1000 Full 100M Full 100M Half 10M Full 10M Half
100M Full 100M Full 100M Full 100M Half 10M Full 10M Half
100M Half 100M Half 100M Half 100M Half 10M Full 10M Half
10M Full 10M Full 10M Full 10M Full 10M Full 10M Half
10M Half 10M Half 10M Half 10M Half 10M Half 10M Half
Link status of the device using Forced / non auto-negotiation to the Switch
The Switch’s
Speed Adver-
tise setting
Device mode setting
1000M Full 100M Full 100M Half 10M Full 10M Half
1000M Full* NC 100 Half 100 Half 10 Half 10 Half
100M Full NC 100M Half 100M Half 10M Half 10M Half
100M Half NC 100M Half 100M Half 10M Half 10M Half
10M Full NC NC NC 10M Half 10M Half
10M Half NC NC NC 10M Half 10M Half

NOTE:
1. Fields with grey color is recommended setting in the
Switch.
2. NC means no communication.
3. 1000M Full setting can be found only in port 25/26 of
FGSW-2402RS and port 17/18 of FGSW-1602RS.
4. Though device with forced full-duplex mode build the link
with the Switch, the performance could be bad due to the
devices runs in Full while the Switch runs in Half-duplex.
3.4.2 Trunking
In this function, user is able to enable or disable Trunking at each group. (8/6 trunks
group base on ports)