Avago Technologies HEDS-8949 - Manual (Page 15)

For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved.
AV02-3143EN - September 24, 2013
The firmware update will start and the progress status of the update will be shown in a message prompt. The firmware
update process consists of an erase, program and verify cycle. Once completed, the downloader software will prompt
an erase/program/verify completed successfully message as shown in Figure 21.
Figure 22. Reset Device process.
Figure 21. Erase/Program/Verify process
Finally, reset the alignment box by pressing the "Reset Device" button as shown in Figure 22. The alignment module will
be running the updated firmware.