ETA Systems FC01-LQ User Manual
Page 31
Flow Meter FC01-LQ
Flow Meter FC01-LQ
Operating system
25
Operating system
25
Menu paging
The next menu option is selected by pressing
MODE (forward paging).
Pressing
MODE after the last menu option will cause skipping to the first option of the menu.
Calling a menu option
Simultaneously pressing
UP and
DOWN =
calls the selected menu option, or
causes skipping to the selected submenu.
Entry of numerals
Some menu options require numerical values to be entered. After selecting the appropriate
menu option, the value indicated can be changed by pressing
UP or
DOWN.
Each time
UP or
DOWN are pressed, the value indicated will be increased and reduced
respectively, by one numeral skip.
The longer
UP or
DOWN are pressed, the faster the increase or reduction.
Transfer of entries
Pressing
MODE transfers the set value or the selected menu option to a volatile memory.
A permanent transfer of settings and values is only effected when quitting the menu, after a
plausibility check of all entries.
Afterwards the data are still available even after switching the FC01-LQ repeatedly on and off.
Deleting data
Selected data such as MIN, MAX values, totalized quantity or LAST ERROR can be deleted or
reset by simultaneously pressing
UP and
DOWN =
.
Caution!
After configuration and parameter selection re-connect plug XTF (keyboard release) to
protect the system against unauthorised access!
▲ + ▼
▼
▲
M
▼
▲
▼
▲
▼
▲
▲ + ▼
▼
▲
M
M
Menu paging
The next menu option is selected by pressing
MODE (forward paging).
Pressing
MODE after the last menu option will cause skipping to the first option of the menu.
Calling a menu option
Simultaneously pressing
UP and
DOWN =
calls the selected menu option, or
causes skipping to the selected submenu.
Entry of numerals
Some menu options require numerical values to be entered. After selecting the appropriate
menu option, the value indicated can be changed by pressing
UP or
DOWN.
Each time
UP or
DOWN are pressed, the value indicated will be increased and reduced
respectively, by one numeral skip.
The longer
UP or
DOWN are pressed, the faster the increase or reduction.
Transfer of entries
Pressing
MODE transfers the set value or the selected menu option to a volatile memory.
A permanent transfer of settings and values is only effected when quitting the menu, after a
plausibility check of all entries.
Afterwards the data are still available even after switching the FC01-LQ repeatedly on and off.
Deleting data
Selected data such as MIN, MAX values, totalized quantity or LAST ERROR can be deleted or
reset by simultaneously pressing
UP and
DOWN =
.
Caution!
After configuration and parameter selection re-connect plug XTF (keyboard release) to
protect the system against unauthorised access!
▲ + ▼
▼
▲
M
▼
▲
▼
▲
▼
▲
▲ + ▼
▼
▲
M
M