ETA Systems FC01-LQ - Manual (Page 11)

Flow Meter FC01-LQ Flow Meter FC01-LQ
Description 5 Description 5
Power supply: DC 24 V supply
Internal switch mode power supply with physical isolation of the
primary and secondary side.
Noise emission on the connection cable is limited by circuit design
and filter.
A PTC resistor provides protection from overcurrent. The element
automatically resets upon removal of the disturbance or after
disconnection of the supply voltage of the FC01-LQ for approx. 1 s
(e.g. remove terminal XV).
Please see para. 8.2.1 for technical characteristics.
Power supply: DC 24 V supply
Internal switch mode power supply with physical isolation of the
primary and secondary side.
Noise emission on the connection cable is limited by circuit design
and filter.
A PTC resistor provides protection from overcurrent. The element
automatically resets upon removal of the disturbance or after
disconnection of the supply voltage of the FC01-LQ for approx. 1 s
(e.g. remove terminal XV).
Please see para. 8.2.1 for technical characteristics.