Elmo ESD-CC1 - Manual (Page 18)

4.3.7 System Date/Time Correction
Select Item 8(as Fig.4.3.7.1) and hit “ENTER” key (as Fig.4.3.7.2), then you can adjust all the devices at same time.
Before you adjust the system date/time. Please check the date/time of this keyboard and make sure it’s correct. Hit “ESC”
to go back System mode.
4.3.8 System Alarm List
Record the latest 10 Alarm information of the system bus.
4.3.9 Camera Type & Class
This item allows you to assign protocol type for each camera in current group number. Use "◄" or "►" key to change
the setting , “▲” or “▼” key to choose the index and “AUTOPAN” or “CRUISE” key to choose the class.
1.7 DateTime Correct
Press ENTER to proc.
Fig.4.3.7.1
1.7 DateTime Correct
Send to all devices?
Fig.4.3.7.2
1.8 Alarm list
Press ENTER to view
Fig.4.3.8.1
x.00/00/00 00:00:00
Alarm camera ID:xxx
Fig.4.3.8.2
1.9 CameraType&Class
Press 1:Type 2:Class
Fig.4.3.9.1
1.9.1 Camera ID #001
[DSCP] Pelco-D Pelco-P
Fig.4.3.9.2
1.9.2 Class1 Index01
Name:Class1 [001]
Fig.4.3.9.3
18