Elmo ESD-CC1 - Manual (Page 11)

And then you have to decide the pan direction and the pan speed:
4.2.6 Cruise
Under Camera Control Mode, you can press “CRUISE” key to enter Cruise mode, the LCD will display:
Cruise mode:
Press "1", the dome starts to cruise automatically, and the LCD will display:
Press "2" allows you to edit the route of cruise. You have to move the dome to the start point, and press “Select Device/
Enter” key to confirm.
3.2 AutoPan Setting
Enter for End Pos.
Fig.4.2.5.4
3.3 Pan Direction
RIGHT/LEFT: LEFT
Fig.4.2.5.5
3.4 AutoPan Speed
(1-4) : _
Fig.4.2.5.6
4.0 Cruise select:
1. Run 2. Setting
Fig.4.2.6.1
Group[xx]Device[xxx]
Running Cruise…
Fig.4.2.6.2
4.1 Cruise setting
Enter for Start Pos.
Fig.4.2.6.3
11