Elmo ESD-CC1 - Manual (Page 14)

Menu 2.4.2 is the entry point for parameters related to Alarm1 input: ON/OFF (detect alarm signal or not), NC/NO
(alarm signal type) and correspondent preset point for each Alarm input:
4.2.8.5 Speed by Zoom
When the lens is in Tele position, the pan/tilt speed is better slowed down to allow the user to trace the target smoothly.
If you select ON here, the Pan/Tilt movement of the Dome will be proportional to the zoom ratio.
4.2.8.6 Set PAN bias
2.4.2 Alarm1 Setting
Press Enter to Setup
Fig.4.2.8.4.2
2.4.2.1 Alarm1 Setup
[OFF] ON
Fig.4.2.8.4.3
2.4.2.2 Alarm1 Setup
[NO] NC
Fig.4.2.8.4.4
2.5 Speed by Zoom
[OFF] ON
Fig.4.2.8.5
2.6 Set PAN bias
[+1]
Fig.4.2.8.6
2.4.2.3 Alarm1 Setup
Preset : [001]
Fig.4.2.8.4.5
14