Time zone, Auto panel reset, Ge 9-78 – TA Triumph-Adler DCC 2930 User Manual
Page 384: E 9-78), Time zone …9-78, Auto panel reset …9-78
Default Setting (System Menu)
9-78
3
Select [MM/DD/YYYY], [DD/MM/YYYY], or [YYYY/MM/DD] and press [OK].
Time Zone
Set the time difference in the location you are from GMT.
Use the procedure below to set the time difference.
1
Press the System Menu key.
2
Press [
], [Date/Timer] and then [Change] of Time Zone.
3
Select the location.
NOTE:
Press [
] or [
] to select the location.
4
Press [Off] or [On] of Summer Time and press [OK].
NOTE:
If you select a region that does not utilize summer time, the summer time setting screen will not appear.
Auto Panel Reset
If no jobs are run for a certain period of time, automatically reset settings and return to the default setting.
NOTE:
Refer to page 9-16 for the default settings.
Auto Panel Reset
Select to use Auto Panel Reset or not.
Use the procedure below to specify the auto panel reset setting.
1
Press the System Menu key.
2
Press [
], [Date/Timer] and then [Change] of Auto Panel Reset.
3
Press [Off] or [On].
4
Press [OK].