TA Triumph-Adler DCC 2930 - Manual (Page 348)

Default Setting (System Menu)
9-42
Message Banner Print
This sets whether or not the confirmation screen appears before each sheet is printed when printing multiple
banner sheets.
NOTE: Select this setting when the optional banner tray is attached.
The table below shows the available settings.
The procedure is as follows.
1 Press the System Menu key.
2 Press [Common Settings] > [ ] twice > [Change] in Message Banner Print.
3 Press [Off] or [On].
4 Press [OK].
Item Description
Off The confirmation screen is not displayed. (Paper is fed continuously.)
On The confirmation screen is displayed before each sheet is printed.