Background density adj, Drum refresh, Ge 9-70 – TA Triumph-Adler DCC 2930 User Manual
Page 376: Background density adj. …9-70
Default Setting (System Menu)
9-70
Background Density Adj.
Adjust the density used when the background of documents is automatically adjusted.
Use the procedure below to set the Background Density Adj..
Copy (Auto)
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3
Press [Change] of Copy (Auto).
4
Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5
Press [OK].
Send/Box (Auto)
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3
Press [Change] of Send/Box (Auto).
4
Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5
Press [OK].
Drum Refresh
Refresh the drum when image blur or white spots appear on images in copies.
NOTE:
Drum Refresh cannot be performed while printing. Execute Drum Refresh after the printing is done.
Use the procedure below to refresh the drum.
1
Press the System Menu key.
2
Press [
], [Adjustment/Maintenance].
3
Press [Next] of Drum Refresh.
4
Press [Start] to perform Drum Refresh.
5
After Drum Refresh is completed, press [OK] to return to the Adjustment/Maintenance screen.