TA Triumph-Adler DC 2062 - Manual (Page 30)

Page 2-13
2-6 Main Dialogue Box
4 Original Type…Lets you select, from among the following, the type of original that is actually being
scanned: Photo, Text, Mixed (Photo & Text) and OCR
5 Resolution…Lets you select, from among the following, the desired scanning resolution: 600 dpi, 400
dpi, 300 dpi and 200 dpi
6 Scanning…Lets you determine the scanning operation.
Auto: If you set one or more originals to be scanned in the DF, the operation will continue until all of
the set originals are scanned.
If you set the original on the platen, that original will be scanned and the scanner will wait for the next command.
Page: One original will be scanned and the scanner will wait for the next command.
7 Page Separation…Lets you select whether or not you want to scan both sides of the original.
None: Only one side of the original will be scanned.
2 Sided: Both sides the original will be scanned.
2 Sided (Rotate): Both sides the original will be scanned, but the image on the back side will be rotated 180
°
.