TA Triumph-Adler 261ci - Manual (Page 21)

1-7
Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)
Quick Setup Wizard (Fax Setup)
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Step Setting item Description Reference
Page
1.Dialing/RX Mode Dialing Mode Select the dialing mode according to the line type. 9-7
Reception Mode Select the reception mode. 9-8
Auto (DRD) *
* DRD reception mode is available for some countries.
Select the reception pattern. 9-8
2.Local Fax Info. Local FAX Name Register the local fax name printed on the fax on the
receiving system. 9-7
Local FAX Number Enter the local fax number to be printed on the fax on
the receiving system. 9-7
Local FAX ID Enter the local fax ID. The local fax ID can limit other
parties with which you can communicate. Enter the
four-digit local FAX ID number. 9-7
Print Position (Transmit
Terminal Identification:
TTI) Select whether or not to print the local fax information
on the fax on the receiving system. 9-7
3.Sound Volume Speaker Volume Set the volume when pressing [On Hook].
Speaker Volume: Volume of the built-in speaker when
the line is connected by pressing [On Hook]. 9-6
Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when
the line is connected without pressing [On Hook] such
as in memory transmission. 9-6
Job Finish Sets whether an audible signal is generated when a job
is successfully completed. 9-6
4.Rings Normal Set number of times to let phone ring before answering
a call. 9-8
Answering Machine Set number of times to let phone ring before taking over
from the answering machine. 9-8
FAX/TEL Switch **
** For FAX/TEL Switch, this change is possible with some countries.
Set number of times to let phone ring before switching
the FAX and the phone. 9-8
5.Redial Retry Times Set the number of redials. 9-7
NOTE
The settings can be changed in the system menu. Refer to Default fax settings on page 9-2 or the Operation Guide for
the machine.