TA Triumph-Adler CX 8020 - Manual (Page 57)

5. Change the setting value of timer by pressing DECREASE Key and INCREASE Key (3).
The selectable values are 10, 30, 1h (1 hour), 2h and 4h.
DECREASE INCREASE
LEAD EDGE
TRAIL EDGE
CUT MODE
C
CLEAR
STOP
ALL CLEAR
LEAD EDGE
TRAIL EDGE
CUT MODE
DECREASE INCREASE
C
CLEAR
STOP
ALL CLEAR
3
NOTE
It is possible to cancel the setting if you press the STOP/ALL CLEAR Key (4) in the middle of
setting.
6. When you have finished all the settings, press the STAND BY Key (1).
If you leave the machine without any operation for the time you specified,
the CX 8020 is turned off automatically by the Power OFF Mode.
NOTE
If both the Power Saving Mode (Automatic) and the Power OFF Mode are ON, the Power
OFF Mode has the priority.
Power Saving Mode Power OFF Mode
Timer 30 minutes 120 minutes
The Power Saving Mode works 30minutes later if you make no operation.
Then the Power OFF Mode works 90 minutes later since the Power Saving Mode has
worked.
Power Saving Mode Power OFF Mode
Timer 60 minutes 60 minutes
The Power OFF Mode works 60minutes later if you make no operation, but the Power
Saving Mode does not work.
Power Saving Mode Power OFF Mode
Timer 60 minutes 30 minutes
The Power OFF Mode works 30minutes later if you make no operation, but the Power
Saving Mode does not work.
Chapter 3 Useful Function 3-14