TA Triumph-Adler CX 8020 - Manual (Page 29)

6. Lift up the Feeding Roller Cover (6) until
6
it is locked.
7. Hold on the sides of the media about 30mm from the top leading edge, pulling the paper
outwards ( to keep the lead edge taught ) Feed the media straight up in between the rollers
noted . Insert the leading part (about 50mm) of the roll paper between the Feeding Roller
Cover (6) and the Roller (7).
And then bring down the Feeding Roller Cover (6).
8. Rewind the roll paper a little to remove any
slack in the roll paper.
Chapter 2 Basic Operation 2-7
NOTE
The roll paper may be transported with skew if the roll paper is loose.
6
7
6
6
7