TA Triumph-Adler CX 8020 - Manual (Page 24)

2. 1 Turning on the CX 8020
1. Plug the CX 8020 into an exclusive wall outlet.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Ground the printer for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are
plugged. It may overheat the outlet and may result in a fire.
(4) outlet must satisfy 220-240V +6%/-10%, 50/60Hz and 10A.
2. There is a Power Switch (1) on the right front side
of CX 8020.
1
Press its “ I ” side to turn on the CX 8020.
Chapter 2 Basic Operation 2-2