TA Triumph-Adler CX 8020 - Manual (Page 17)

1. 8 Appearance
1. 8. 1 Front View
No. Name Function
1 Original Table Open the Original Table and put the original onto it.
2 Exit Cover Open the Exit Cover when you remove a mis-fed paper
in the Fuser Unit.
3 Copy Exit Copies are ejected from the Copy Exit.
4 Bypass Feeder Table Open the Bypass Feeder Table when you make a copy
with a cut sheet paper.
5 Front Door Open the Front Door when you replace the roll paper.
6 Upper Unit Open Lever Press down these levers to unlock and open the Upper
Unit.
7 Original Feed Unit The Original is transported under the Original Transport
Unit.
8 Original Feed Table Put the original on the Original Feed Table, and push it
in for the scan.
9 Original Guide Move the Original Guide according to the width of
original.
The original is transported along with it.
10 Operation Panel Several copying operations are available.
Refer to [1.8.3 Operation Panel] on the page 1-13.
Chapter 1 Before Use 1-10
8
9
7 6
6 1
3
2
4
1
5
1 1
15
14
1