TA Triumph-Adler CX 8020 - Manual (Page 12)

1. 4 Specifications
Subject Specification
Model CX
8020
Configuration Desk Top Type
Original Sheet through type
Photoconductor Organic Photoconductive Drum
Copy method Indirect Electrostatic System
Copy speed 60mm per second (1.5 copies (A0) / minute)
Light Source Fluorescent lamp
Kind of Original Sheet
Original thickness Maximum 0.2mm
Minimum 0.05mm
Original width Maximum 841mm
Minimum 210mm
Original length Maximum 3000mm
Minimum 297mm
Copying width Maximum 841
Minimum 210mm
Copying length Maximum 3000mm
Minimum 297mm
Warm up time Less than 8 minutes
(At 23
o C, 60%RH, the rated voltage, and plain paper is used)
First copy time 33 seconds (A0 size)
Media feeding method Automatic roll paper feeding & manual cut sheet paper feeding
Fusing method Heat Roller Fusing
Exposure method Lens array
Development method Dry (Mono-component)
Copy magnification ratio 1 : 1
Input power 220-240V plus 6% or minus 10%, 50/60Hz, 6.5A
Maximum power
consumption 1600W
Acoustic noise Stand by Max. 50db
Printing Max. 55db
Impulse sound Max. 60db EN ISO7779
Ozone Max. 0.1ppm (Measurement method under UL Standard)
Dimensions 1293mm (Width) x 460mm (Depth) x 580mm (Height)
Weight About 125kg
Media Plain Paper 64 to 80g/m 2
Vellum 64 to 80g/m 2
Film 120g/m 2
Environmental condition
for usage (Temperature)
10 to 30 degrees Centigrade
(Humidity)
20 to 80% RH
Storage of consumables (Media)
Wrap the media surely to shut out the humidity.
(Toner bottle)
Store the toner within the temperature range from 0 to
35 degrees Centigrade and within the humidity range from 10
to 85% RH.
Chapter 1 Before Use 1-5
NOTE : The above specifications may change without notice.