TA Triumph-Adler CX 8020 - Manual (Page 49)

3. 4 Adjusting the Leading/Trailing Margin
You can provide the copy with a Leading/Trailing Margin.
1. Whenever you press the LEAD/TRAIL Select Key (1),
the LEAD EDGE Indicator (2) and the TRAIL EDGE
Indicator (3) light alternately.
It is possible to change the setting value of Leading
Margin indicated on the Indication Part (4) when the
LEAD EDGE Indicator is lighting.
Similarly it is possible to change that of Trailing Margin
when the TRAIL EDGE Indicator is lighting.
2. Change the setting value pressing both the INCREASE Key
and DECREASE Key (4).
The unit of setting is millimetre.
Setting ranges are as follows.
Leading Edge : +/- 40mm in 5mm increment
Trailing Edge : 0 to +40mm in 5mm increment
Chapter 3 Useful Function 3-6
STAND BY
SL
LIGHTER DARKER
FILM
VELLUM/TRACING
PLAIN PAPER
MEDIA
ROLL
CUT SHEET
C
CLEAR DECREASE INCREASE
LEAD EDGE
TRAIL EDGE
CUT MODE
DECREASE INCREASE
C
CLEAR
STOP
ALL CLEAR
NOTE
It is impossible to provide a Trailing Margin when you copy with a cut sheet paper.
2
1 4
3