TA Triumph-Adler P-C3570DN User Manual
Page 144
Using the Operation Panel
4-71
Protocol Detail (Detailed settings for the network protocol)
This selects the settings for Protocol Detail.
1
In the TCP/IP Settings menu, press or to select Protocol
Detail.
2
Press [OK]. The Protocol Detail menu screen appears.
3
Press or to select the item for which you want to make settings.
4
Press [OK]. This displays the setting screen for the item selected in
step 3.
The screen shown is the one when NetBEUI is selected.
5
Press or to select On or Off.
6
Press [OK]. The Protocol Detail menu reappears.
Item
Description
Default
Setting
Restarting
the System
†
†. : The machine must be restarted after the setting is changed.
×: The machine does not need to be restarted after the setting is
changed.
NetBEUI
Selects whether or not to
receive documents using
NetBEUI.
On
×
SNMPv3
Set SNMPv3.
Off
FTP (Server) Select whether or not to
receive documents using FTP.
On
SNMP
Select whether or not to
communicate using SNMP.
On
SMTP
Select whether or not to send
e-mail using SMTP.
Off
×
POP3
Select whether or not to
receive e-mail using POP3.
Off
×
RAW Port
Select whether or not to
communicate using RAW Port.
On
LPD
Select whether or not to
receive documents using LPD
as the network protocol.
On
HTTP
Select whether or not to
communicate using HTTP.
On
Protocol Detail: a
b
1 NetBEUI
2 SNMPv3
3 FTP(Server)
[ Exit
]
NetBEUI:
a
b
1 Off
2 *On