TA Triumph-Adler P-C3570DN User Manual
Page 119
4-46
Using the Operation Panel
Setting a Custom Paper Size
In the procedure below, select the units to be used for entering the custom
paper size and then enter the paper width and length. As shown in the
figure, enter the Y and X values for the paper size, using the selected
units.
1
In the Cassette # Set menu, press or to select Custom
PaperSize.
# shows the number of the cassette installed in the printer (1 to 5).
2
Press [OK]. The Custom PaperSize menu screen appears.
3
Press or to select Measurement.
4
Press [OK]. The Measurement menu screen appears.
5
Press or to select the paper size units and then press [OK]. The
unit for entering the paper size is set and the Custom PaperSize
menu screen reappears.
6
Press or to select Size Entry(Y).
7
Press [OK]. The Size Entry(Y) menu screen appears.
X Dimension
Y Dimension
105 to 216 mm
(4-1/8 to 8-1/2 inches)
148 to 3
56 mm
(5
-13/16
to 14 inche
s)
Cassette 1 Set.: a
b
1 Media Type
2 Other Paper Size
3 Custom PaperSize
[ Exit
]
Custom PaperSize: a
b
1 Measurement
2 Size Entry(Y)
3 Size Entry(X)
[ Exit
]
Measurement:
a
b
1 *inch
2 mm
Size Entry(Y):
a
b
(5.83 - 14.02)
/*7.00-"
M