Elation Professional 5R - Manual (Page 29)

Platinum Spot 5R™
©Elation Professional, Los Angeles Ca. 29 www.ElationLighting.com
Clear Last Run
This function will allow the “Last Run Hours” function be cleared and reset.
L-Timer Password
Use this function to enter the “Clear Lamp Time” password. Password is “038”
Clear Lamp Time
This function resets the lamp “ON” time to zero. Please reset the lamp “ON” time at
every lamp replacement. This procedure tracks the lamp running time so the lamp
can be replaced at the end of it’s recommended duty cycle.
• Select “Clear lamp time” in the system menu.
• The LCD will display “ON” or “OFF.” Were “ON” will reset the lamp time.
• Press enter to confirm.
• Press the Mode/Esc-button to return to the main menu.
9.2.2. Temperature Info.
This function will detail the internal head temperature in either Celsius or Fahrenheit.
9.2.3. Software version
This function will display the current operating software version of the fixture.
• The LCD will read “V-X.X”, “X.X” represents the version number, e.g. “V-1.0”,
“V-2.6”.
• Use the UP and DOWN buttons to toggle through the software version of
different IC’s.
9.3 Lamp Control:
9.3.1 Lamp On or Off
This function allows manual control of the lamp power via the on-board system menu.
• Select “ON” if you wish to strike the lamp or “OFF” to switch it off.
• Press “ENTER” to confirm.
• Press the Mode/Esc-button to return to the main menu.
9.3.2 Automatic La-On
When in the “ON” position, this function will automatically turn the lamp on when power
is applied to the fixture