RIGOL DG1000 Series - Manual (Page 16)

RIGOL
Quick Guide for DG1000
8
Quick Start
Waveform Settings
DG1000 can generate Basic, Arbitrary, Modulated, Sweep and Burst
Waveforms.
1． Basic/Arbitrary Waveform Settings
The instrument is available to output 5 kinds of basic
waveforms: Sine, Square, Ramp, Pulse and Noise. Besides, it
has 48 kinds of built-in arbitrary waveforms and provides 10
nonvolatile storage positions to store arbitrary waveforms
defined by users.
Figure 6 Buttons for selecting Basic/Arbitrary waveforms
Press a button above to enter waveform setting interface.
Different waveform has different parameters.
E.g. Press
 DtyCyc to set “Duty Cycle” parameter in the
way mentioned in “Parameter Input” section.
Figure 7 Parameters setting interface