Device connection, Power connection – RIGOL DG1000 Series User Manual
Page 13
RIGOL
Quick Guide for DG1000
5
Device Connection
Power Connection
Connect the power socket and AC with power cord attached to the
instrument.
Turn on the power switch at the rear panel to power on DG1000,
therewithal, the power button on the front panel will be lighted and
flashing on and off alternatively. Press it to start the instrument
immediately.
If start abnormally, please check according to the following steps:
1． Check if the power cord is normally connected and the power
switch on the rear panel has been turned on.
2． Check if the fuse is intact, or esle please replace it.
3． If the instrument still cannot be started, contact RIGOL for
help.