RIGOL DS6000 Series - Manual (Page 37)

RIGOL
RP1001C User’s Guide 7
AC Power Adapter
1
The specified AC power adapter can be used to avoid
measurement error due to poor battery durability.
2 When using an AC power adapter for an extended time, you are
recommended to remove the battery. This is because heating will
result in battery leakage, and battery electrolyte will rust the
circuit board, thus creating major damage. Furthermore, as
batteries are high pollution products, you are recommended to
avoid using them as far as possible.
Cleaning
To clean the probe exterior, use a soft cloth dampened in a solution of
mild detergent and water. To clean the core, open the test clamp and
clean the exposed core surfaces with a cotton swap dampened with
isopropyl alcohol (isopropanol). Lubricate the clamp mating surfaces
with light oil.
Note: Do not clean with solvents or abrasives. Do not immerse the
probe.