RIGOL DS6000 Series - Manual (Page 36)

RIGOL
6 RP1001C User’s Guide
Maintenance
Battery
1
The RP1001C current probe uses a single square 9 V battery.
This instrument is a high power product. Please use the specified
alkaline battery.
2 As the battery in the RP1001C current probe is drained,
significant measurement errors may occur. The green battery
indicator will continue to light until a low battery voltage of 6.5 V
is reached.
To Install the Battery
1
Remove the test clamp from the circuit.
2 Remove the screw on the battery compartment cover at the rear
panel of the probe and then remove the battery compartment
cover.
3 While observing polarity, install the alkaline battery at the
corresponding location.
4 Install the battery compartment cover.
Battery Compartment