Retrotec Flow Finder MK 2 - Manual (Page 3)

Page 3 of 17
M:\PDF\Source\Manual-FlowFinder mk2\Manual-FlowFinder mk2.docx © Retrotec Inc. 2014
9. Storage and Calibration .............................................................................. 17
Storage .................................................................................................................................................... 17
Long term storage ................................................................................................................................... 17
Calibration ............................................................................................................................................... 17
Despite the fact that this manual has been carefully written, no responsibility is accepted for any errors
in the manual and possible consequences. We are very interested in your comments and additions.
copyright Retrotec Inc. 2014.
Important equipment-related safeguards
When using electrical appliances, basic safety precautions should always be followed. If Retrotec equipment is
used in a manner that does not follow the information provided in this manual, safety to the operator and
equipment performance may be impaired.
To protect against the risk of fire, electric shock, and injury to persons during battery charging:
Do not operate the charger with a damaged electrical cord.
Do not place this equipment or power cord in water or other liquid.
Use only the included power plug to operate the fan. Do not use ungrounded outlets or adapter plugs.
Never remove or modify the grounding prong.
For use under indoor conditions only, where there is no exposure to water or dusty substances or explosive
materials or flammable materials.
Do not use equipment for other than its intended use.
Equipment is intended for diagnostic testing and to be operated for brief periods under supervision by a
qualified operator.
Ensure that no debris is inside the fan casing before operating the FlowFinder.
Failure to follow these instructions carefully may result in bodily injury, damage to property and/or equipment
failure. Failing to operate equipment as intended may void warranty and compliance with CE mark and other
listings.
Important occupant safeguards during testing
Please read the following carefully before carrying out tests:
If dust, pollen, mold spores, chemicals, asbestos, vermiculite dust, fiberglass dust, cellulose dust,
lead paint dust or other undesirable substances can get blown into living spaces, keep those
susceptible to these substances away from the test area, and wear dust masks or do not test.
Failure to follow these instructions carefully may result in bodily injury, damage to property and
equipment failure.