Retrotec Flow Finder MK 2 - Manual (Page 11)

Page 11 of 17
M:\PDF\Source\Manual-FlowFinder mk2\Manual-FlowFinder mk2.docx © Retrotec Inc. 2014
6. Changing settings
Touch the white arrow in the upper right hand corner to arrive at the “FlowFinder Start Menu”.
1. Tap [Adjust] for making adjustments to airflow where continuous readings must be taken.
Readings will NOT be stored.
2. Tap [Validate] to store a series of flow readings from supply and/or return registers.
3. Tap [Options] to:
a. Change the units. Touch the [Units] button and toggle the unit of temperature
(Celsius or Fahrenheit) and the unit for flow (l/s, m³/h or CFM). Go back to the
Options by touching the white arrow in the right upper hand corner
b. Find the serial number, last calibration date etc. under the Information button.
c. Toggle between the [Dutch] and [English] languages.
d. Tap [Validate] or [Adjust] to set as the default on start-up.
e. Tap [Date], year, [OK], month (mm) [OK], day (dd) [OK].
f. Tap [Time], hour (0 to 23) [OK], minutes [OK].
Tap the white “return” arrow and select “Validate” or “Adjust” to prepare for measurements.
Touch here