Start up in adjust mode will look like this – Retrotec Flow Finder MK 2 User Manual
Page 10
Page 10 of 17
M:\PDF\Source\Manual-FlowFinder mk2\Manual-FlowFinder mk2.docx
© Retrotec Inc. 2014
Start up in Adjust Mode will look like this:
A red zero will be displayed. Below the flow unit there is a bar that fills up in green or red during a
measurement. The length of the filled bar is proportional to the airflow. An orange bar indicates that
the FlowFinder is using “calculated compensation” which means the fan cannot establish a zero pressure
at the register and the flow must be calculated with an assumption as to how much the flow is being
affected by the pressure.
Ready to measure in ‘Adjust’ mode