RISCO Group SafeWord OTP Server - Manual (Page 4)

OTP Server Installation Manual
Uncontrolled when printed © RISCO Group iii
Quick Guide for Installing SafeWord OTP Server
Prerequisites for installation:
• Machine where SafeWord OTP Server will be installed has Windows XP or Windows Vista
Operating System.
• Ensure that the hardware and software prerequisites are fulfilled.
Table 1: Installation Checklist
Steps Additional Information in the
Manual
• Verify if all the prerequisites are fulfilled.
Pg no. 1, 1.1 SafeWord OTP Server
Environment .
• Go to the location where the OTP Setup file is provided.
Pg no. 2, 1.2 Installing OTP Server .
• Double-click the OTP Setup icon and follow the steps. Pg no. 2, 1.2 Installing OTP Server .
• Enter the Product Serial Number provided with the
installation set in the dialog box.
Pg no. 3, Figure 3: Product Serial
Number
• Select the components that you want to install.
Pg no. 6, Figure 7: Select
Components for Installation
• Select the User Management Configuration method,
whether Active Directory or SafeWord Management
Console.
Pg no. 7, Figure 8: User
Management Configuration
• Select the Server components applicable for RAC system Pg no. 8,
Figure 9: Server
Components
• Provide host internet domain in the Host Address field.
Pg no. 9, Figure 10: Host Address
• Click Finish. The SafeWord OTP Server is installed
successfully
Pg no. 9, Figure 11: InstallShield
Wizard Complete
• Several services are installed with SafeWord OTP Server.
Ensure that these services are running.
Pg no. 10,
1.3 Starting the Services
• After you install the server, you need to activate the OTP
tokens. Register on the SafeWord Portal to activate the
tokens.
Pg no. 10, 1.4 Activating SafeWord
Token Authenticators
• Configure RADIUS Server to make the SafeWord OTP
tokens work with the RAC system.
Pg no. 24, 1.8 Configuring RADIUS
Server
The installation manual describes the installation steps in detail in the further sections.