RISCO Group SafeWord OTP Server - Manual (Page 34)

OTP Server Installation Manual
Uncontrolled when printed © RISCO Group 27
7. In Hostname/ IP: field enter the Host name/IP Addresses of RMAC and AMAC Service
Components.
8. In Secret field, enter any unique key similar to the one provided in AMAC and RMAC service
configuration.
9. In Type field, select NAS (Network Access Server that is used as a gateway to verifies access to
resources ).
10. Click Add to add the configured client to the console.
11. Repeat the above mentioned steps to add more clients.
Note: After you are done with configurations, check your RMAC and AMAC Service
configurations to provide IP address of RADIUS Server and shared secret.
For more details or queries on SafeWord OTP Server, refer to the SafeWord Server Documentation.