RISCO Group ACUS User Manual

Page 16

User Manual for ACUS Installer

Uncontrolled when printed

15. Replace ‘localhost’ with . Enter the server name where your AMAC Services are

currently running. For example, enter 01HW183344.

Note: By default, each service uses a port through which the client communicates with the server.

When you point the client application to the machine where AMAC or RMAC service is running,
ensure that you specify the port number which should be used for the communication between
Service and Client. A same port may not be used for AMAC and RMAC.

When you want to use a different port, specify the port number in the format :

16. In the Enable Events for SmartClient drop-down list, select Yes to enable event from local DCC that

is SmartClient. Select No to disable the events from SmartClient.

17. Click Next. The Ready to Install the Program dialog box appears.

Figure 13: Ready to Install

18. Select the Create Shortcut on Desktop check box. When ACUS is completely installed, the shortcut

will appear on your desktop.

19. Click Install. The Installation progress window appears.