HP OfficeJet Pro 7740 - Manual (Page 112)

Set up the printer on your wireless network
Use the Wireless Setup Wizard from the printer control panel display to set up wireless communication.
NOTE: Before you proceed, go through the list at Before you begin .
1. From the printer control panel, touch or swipe down the tab at the top of the screen to open the
Dashboard, and then touch
(Wireless).
2. Touch ( Settings ).
3. Touch Wireless Settings.
4. Touch Wireless Setup Wizard or Wi-Fi Protected Setup.
5. Follow the display instructions to complete the setup.
If you are already using the printer with a different type of connection, such as a USB connection, follow the
instructions in Change the connection type to set up the printer on your wireless network.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer or to a network,
you can use the software to change the connection type (for example, from a USB connection to a wireless
connection).
NOTE: Connecting an Ethernet cable turns off the wireless capability of the printer.
To change from an Ethernet connection to a wireless connection (Windows)
1. Remove the Ethernet cable from the printer.
2. Run the Wireless Setup Wizard to make the wireless connection. For more information, see Set up the
printer on your wireless network .
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin .
1. Open the HP printer software. For more information, see Open the HP printer software (Windows) .
2. Click Tools.
3. Click Device Setup & Software.
4. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB or Ethernet connection to a wireless connection (OS X)
1. Remove any USB or Ethernet cable from the printer.
2. Restore the printer to its network defaults. For more information, see Restore original factory defaults
and settings .
3. Download the most recent version of HP Easy Start from 123.hp.com.
4. Open HP Easy Start and follow the onscreen instructions to connect your printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information . At this time, this website might not be available in all languages.
ENWW Set up the printer for wireless communication 99