Specifications, Base device specifications – Precision Medical Oxygen Monitor User Manual
Page 6
5
O
xygen
M
OnitOr
SPECIFICATIONS
Base Device Specifications
Dimensions
(Monitor without cable and sensor attached):
Length:
1.72” (4.36 cm)
Width:
3.56” (9.04 cm)
Height:
5.44” (13.82 cm)
Cable Length:
10 ft. (3.05m) (fully extended)
Weight:
Device Weight:
1.11 lbs (0.50 kg)
(includes: monitor, sensor, batteries and cable)
Shipping Weight:
1.64 lbs (0.75 kg)
Operating Conditions:
Temperature:
50ºF- 113ºF (10ºC - 45ºC)
Altitude:
Sea Level to 8000 feet
Storage Conditions:
Temperature:
5°F - 122°F (-15°C- 50°C)
Humidity:
0 - 95% non-condensing
Mode of Operation:
Continuous
Electrical Classification:
Internally powered Medical Electrical equipment
Power Requirements:
4, AA Alkaline Batteries (4 x 1.5 Volts) 6 VDC
Battery Life:
approximately 2000 hours
(continuous use non-alarm condition)
Diverter Fitting:
fits industry standard, 15 mm “T” adapter
Measurement Range:
0.0 - 100%
Resolution:
0.1 Increments
Accuracy & Linearity:
± 1% of full scale at constant temperature, R.H. and
pressure when calibrated at full scale
Total Accuracy:
± 2.5% Actual Oxygen Level over full operating
temperature range
Response Time:
90% of final value in less than 12 seconds at
77°F (25ºC)
Warm-up Time:
none required