Precision Medical Oxygen Monitor - Manual (Page 10)

9
O
xygen
M
OnitOr
OXYGEN SENSOR COMPONENT IDENTIFICATION
Coiled Cable
Locking Ring
Oxygen Sensor
Diveter Fitting
Tee Adaptor
ITEM NAME DESCRIPTION
Coiled Cable with
Male Plugs
The Coiled Cable allows the Sensor to be positioned
up to 10 ft from the side of the Oxygen Monitor. There
are Male
Plugs at each end
of the Coiled Cable.
Male Plug has a Locking Ring and must be engaged
when in use.
Locking Ring
Male Plugs have a Locking Rings and must be
engaged when in use.
Oxygen Sensor Galvanic Oxygen Sensor
Diverter Fitting Fitting used to connect to the Oxygen Source.
Tee Adaptor
The Tee Adaptor is used to connect the Oxygen
Sensor and Diverter Fitting to an oxygen pathway
circuit.
2
Note: The Tee Adaptor is intended for
single patient use only.