Precision Medical Oxygen Monitor - Manual (Page 19)

18
O
xygen
M
OnitOr
REPLACEMENT PARTS
Description Part #
User Manual 505127
Precision Medical Oxygen Sensor with Diverter 504877
Tee Adaptor 505126
Extendible Cable 504937
AA Alkaline Battery (4 Pack) 505124-4
Rubber Feet (4) 505122-4
Battery Cover 504909
V Block 505010
Diverter 505344
ACCESSORIES
Description Part #
Monitor Wall Mount Bracket 505189
Monitor Vertical Pole Mount Clamp 505013
Monitor Horizontal Pole Mount Clamp 505014
Dove tail Bracket 505012
Dove tail Bracket Screw 505712
Orders for replacement parts should include the part number, if available and the
model and serial number of the instrument for which the parts are intended.
ALARM CONDITIONS
Alarm Condition Alarm Meaning Corrective Action
High alarm LED flashing
and auditable beep
Measured O2
concentration is higher
than the high alarm set
point.
• Adjust O2 concentration
source to prescribed
dose.
• Set high alarm to
prescribed limit.
Low alarm LED flashing
and auditable beep
Measured O2
concentration is lower
than the low alarm set
point.
• Adjust O2 concentration
source to prescribed
dose.
• Set low alarm to
prescribed limit.
Low Battery symbol on
and O2 displays “- - -“
instead of a value.
The voltage output of
the installed batteries
is low and will require
replacement soon.
• Replace all batteries with
new batteries.
Oxygen Sensor symbol on. Oxygen Sensor failure • Replace O2 sensor
• Recalibrate O2 Monitor