Precision Digital PD6060 - Manual (Page 6)

Model PD6060 Dual-Input Process Meter Instruction Manual
6
Table of Figures
Figure 1. 1/8 DIN Panel Cutout Dimensions ..................................... 16
Figure 2. Panel Mounting Details ...................................................... 17
Figure 3. Jumper Configuration for 12/24 VDC Power .................... 17
Figure 4. Transmitter Supply Voltage Selection .............................. 18
Figure 5. Connector Labeling for Fully Loaded PD6060 ................. 19
Figure 6. Power Connections ............................................................ 19
Figure 7. Transmitters Powered by Internal Supply ........................ 20
Figure 8. Transmitter Powered by Ext. Supply or Self-Powered .... 20
Figure 9. Voltage Input Connections ................................................ 21
Figure 10. Relay Connections ........................................................... 21
Figure 11. AC and DC Loads Protection ........................................... 22
Figure 12. Low Voltage DC Loads Protection .................................. 22
Figure 13. F4 Digital Input Connections ........................................... 23
Figure 14. 4-20 mA Output Connections .......................................... 23
Figure 15. Expansion Modules & DIN Rail Mounting Kit ................. 24
Figure 16. External Relays Module Connections ............................. 24
Figure 17. Digital I/O Module Connections ....................................... 25
Figure 18. Interlock Connections ...................................................... 25
Figure 19. Acknowledge Relays w/Function Key or Digital Input .. 60
Figure 20. Meter Copy Connection ................................................... 83
Figure 21. Meter Dimensions - Side View ......................................... 99
Figure 22. Meter Dimensions - Top View .......................................... 99
Figure 23. 1/8 DIN Panel Cutout Template ...................................... 101
INTRODUCTION
The P RO V U
® PD6060 is a multipurpose, easy to use digital dual-input process meter
ideal for level, flow rate, temperature transmitter, or pressure transmitter applications.
It accepts current and voltage signals (e.g. 4-20 mA, 0-10 V). Various math functions
may be applied to the inputs including addition, difference, absolute difference,
average, weighted average, multiplication, division, minimum, maximum, draw, ratio,
and concentration. This is in addition to the signal input conditioning functions (linear,
square root, programmable exponent, or round horizontal tank calculations).
The displays, relays, and the analog output may be assigned to input channels A or B,
or math result channel C.
Three of the front panel buttons can be custom-programmed for a specific operation.
The basic model includes an isolated 24 VDC transmitter power supply that can be
used to power the input transmitters or other devices. An additional isolated 24 VDC
power supply is included with the 4-20 mA output option.
A fully loaded PD6060 meter has the following: four SPDT relays, 4-20 mA output, and
two 24 VDC power supplies. The PD6060 capabilities may be enhanced by adding the
following external expansion modules: four SPST relays –creating an eight-relay dual-
input process meter, two digital I/O modules with four inputs and four outputs each, and
serial communication adapters for use with MeterView Pro or Modbus RTU.