Precision Digital PD6060 - Manual (Page 42)

Model PD6060 Dual-Input Process Meter Instruction Manual
42
Setting the Display Parameter & Intensity (dsplay)
The main display (Big) can be programmed to display:
1. Process value Ch-A
2. Process value Ch-B
3. Process value Ch-C
4. Toggle between Ch-A & Ch-B, Ch-A & Ch-C, Ch-B & Ch-C,
and Ch-A, Ch-B, & Ch-C
5. Toggle between Channel & units
6. Channel gross value (no tare) or toggle net (tare) and gross
values
7. Relay set points
8. Max & min values for each channel
9. Modbus
input
The small display (Little) can be programmed to display:
1. Process value Ch-A
2. Process value Ch-B
3. Process value Ch-C
4. Toggle between Ch-A & Ch-B, Ch-A & Ch-C, Ch-B & Ch-C,
and Ch-A, Ch-B, & Ch-C
5. Toggle between Channel & units
6. Channel gross value (no tare) or toggle net (tare) and gross
values
7. Relay set points
8. Max & min values for each channel
9. Engineering units or custom legends
10. Modbus input
11. Off (no display)
Display Intensity:
The meter has eight display intensity levels to give
the best performance under various lighting conditions. Select intensity
8 for outdoor applications.