Empty run test data – Electrolux FOM 71 CLS User Manual
Page 84

24:2
Temp at the end of heating in
final heating:
The temperature when the hea ting relay
is switched off after reaching 60ºC.
Temp at the end of the main wash:
The temperature in the bath just prior to
drain after main wash.
Amount of water in main wash:
The amount of supplied water to the
main wash.
Amount of water in rinses:
The amount of water supplied in each
rinse.
Total energy consumption:
The total energy consumed during the
program.
Drum Speed:
Drum speed measured in RPM.
Water pressure:
Water pressure (Static) measured
close to inlet valve and during the filling
of water.
Empty run test data
This manual is related to the following products: