Electrolux FOM 71 CLS - Manual (Page 37)

8:3
Cleaning the machine
101772
4
5222
5
5185
3
3
4
5
Repairs
Repair work on the machine should only be
done by specially trained personnel.
Dissambly
For repair works on the drain valve, there is
a risk that water still left in the machine may
flood onto the floor. Be sure to dry up any
spilled water since it may cause people to
slip and hurt themselves.
1. Take down power from the machine by tur-
ning the main power switch to the 0 position.
2. Remove the front cover.
3. Disconnect the drain hose from upper part of
the valve.
4. Undo the hose clamp holding the valve rub-
ber bellows against the sleeve coupling of the
outer drum.
5. Loosen and unscrew the 4 retaining nuts of
the valve a couple of turns (use a socket,
extender and ratchet wrench). Turn the valve
and unhook it from the bolts.
6. Disconnect the pressure hose from the lo-
werm part of the valve.
7. Replace the valve with a new one.
Main power switch
Upper part
Rubber
diaphragm
with drain
connection
Pressure plate
Recoll spring
Cylinder
Diaphragm
Nipple for con-
nection of feed
hose from control
valve
Lower part