Empty run test data – Electrolux FOM 71 CLS User Manual
Page 44
11:2
Temp at the end of heating in
final heating:
The temperature when the hea-
ting relay is switched off after
reaching 60ºC.
Temp at the end of the main wash:
The temperature in the bath
just prior to drain after main
wash.
Amount of water in main wash:
The amount of supplied water
to the main wash.
Amount of water in rinses:
The amount of water supplied
in each rinse.
Total energy consumption:
The total energy consumed
during the program.
Drum Speed:
Drum speed measured in RPM.
Water pressure:
Water pressure (Static) measured
close to inlet valve and during the
filling of water.
Empty run test data
This manual is related to the following products: