MCZ Vivo 80 Pellet Comfort Air - 2012 - Manual (Page 29)

B
B
B
B
C
27
3-INSTALLATION AND ASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
ASSEMBLING THE COMPENSATION FRAME
Once the cladding and/or the plasterboard is set up, fit the previously removed compensation frame.
This frame intends to finish and cover the gap between the metal structure of the product and the cladding.
The frame is assembled by simply opening the door of the product, fitting in the frame as shown in the figure and fastening it to the lateral
columns of the structure, inside the door profile, with the four screws supplied.
C = FRAME
B = SCREW