MCZ Cap NATURAL - Manual (Page 67)

65
15-CLEANING
Technical Dept. - All rights reserved - Reproduction is prohibited
CLEANING THE AIR FILTER
When the stove is installed, one must fit the rear of the stove with the wire mesh air filter, whose purpose is to prevent dirt entering the
motor body and the internal sensor.
It is recommended to check that the filter is clean every 15/20 days. If needed remove fluff or the material that has deposited on it.
Inspection and cleaning are required more frequently if there are pets in the house.
To clean, simply turn the knob that holds the filter on the air intake pipe and remove the filter by turning it in the direction indicated by
the arrow. To clean it use a brush or a damp cloth or compressed air.
The filter is made of metallic mesh and is soft and flexible to the touch therefore, when cleaning, be careful not to
crush or damage it. In the event of breakage it must be replaced.
ATTENTION!
Never let the stove work without the air filter fitted. MCZ cannot be held liable for any damage caused to the internal
components if this requirement is not complied with.