MCZ Cap NATURAL - Manual (Page 23)

v
S
21
4-UNPACKING
Technical Dept. - All rights reserved - Reproduction is prohibited
PREPARATION AND UNPACKING
The packaging consists of a recyclable cardboard box according to RESY standards, recyclable EPS foam inserts, wooden pallets. All
packaging materials can be reused for similar use or eventually disposed of as urban solid waste, in compliance with the regulations in
force.
After having removed the packaging make sure the product is intact.
Handle the product with suitable means paying attention to the applicable safety regulations in force. Do not turn the
packaging over and handle the majolica parts with care.
The stoves are delivered in a single package. Open the package, remove the two screws “v” which secure the stove brackets to the pallet
and then remove the bracket “S” from the stove foot. To prevent damage during transport, the top is fastened to the stove with straps
which must be removed.
Install the stove in the chosen area, making sure it complies with the requirements.
The stove body or unit must always be kept in a vertical position when handled, and handled using carts only. Pay particular attention to
the door and its glass, protecting them from mechanical knocks that would compromise their integrity.
The product must always be moved with care. If possible, unwrap the stove near the chosen area of installation.
The packaging materials are neither toxic nor harmful, therefore no particular disposal measures are required.
In the case of the TRAY stove with serpentine panels, the film that has been placed between the metal panel and the serpentine, to
prevent vibration and consequent breakage during transport, must be removed.
To remove the film:
• Remove the top (see relevant paragraph)
• loosen the screws that fasten the serpentine to the metal (see relevant paragraph)