MCZ Cap NATURAL - Manual (Page 60)

I/ON
58
12-OPERATION
ELECTRICAL CONNECTION
First connect the power cable to the back of the stove and then to a wall socket.
The main switch must only be activated to switch the stove on; otherwise, it is advisable to keep it switched off.
It is recommended to disconnect the power cable when the stove is not used.
STOVE POWER SUPPLY
After connecting the power cable to the back of the stove, turn the switch at the back to position(I).
The luminous switch button will light up.
The switch on the back of the stove is used to power the system.
On the rear of the stove there is a fusebox which is located near the power socket. Open the fusebox cover with a screwdriver and replace
the fuse if necessary (3.15 A delayed) - seek assistance from an authorised and qualified technician.
ELECTRICAL STOVE CONNECTION
STOVE POWER SUPPLY
STOVE SWITCH