MCZ Cap NATURAL - Manual (Page 22)

20
3-DRAWINGS AND CHARACTERISTICS
TECHNICAL CHARACTERISTICS TRAY/CAP/LAM NATURAL
Nominal output power 8 kW (6880 kcal/h)
Minimum power output 2.4 kW (2064 kcal/h)
Efficiency at Max 93%
Efficiency at Min 93%
Temperature of exhaust smoke at Max 160 °C
Temperature of exhaust smoke at Min 110 °C
Particulate /OGC / Nox (13%O
2
) 26 mg/Nm3 - 3 mg/Nm3 - 93 mg/Nm3
CO at 13% O
2
at Min and at Max 0.024 – 0.015%
CO
2
at Min and at Max 5.6% - 7.9%
Recommended draught at Max power*** 0.10 mbar - 10 Pa***
Minimum draft allowed at minimum power 0.0 mbar - 0 Pa
Smoke mass 6.9 g/sec
Hopper capacity 35 litres
Type of pellet fuel Pellet diameter 6-8 mm and size 5/30 mm
Pellet hourly consumption Min ~ 0.8 kg/h* - Max ~ 1.8 kg/h*
Autonomy At min ~ 28 h* - At max ~ 13 h*
Heatable volume m 3 172/40 – 197/35 – 229/30 **
Combustion air inlet Ø 50 mm
Smoke outlet Ø 80 mm
Air intlet 80 cm 2
Rated electrical power (EN 60335-1) 35 W (Max 370 W)
Supply voltage and frequency 230 Volt / 50 Hz
Net weight 135 kg (165 kg LAM in stone)
Weight with packaging 145 kg (174 kg LAM in stone)
Distance from combustible material (back/side/under) 50/50/0 mm
Distance from combustible material (ceiling/front) 800/800 mm
* Data that may vary depending on the type of pellets used
** Volume that can be heated, according to the power requirement per m 3 (respectively 40-35-30 Kcal/h per m 3 )
***Value recommended by the manufacturer (non-binding) for optimal product operation
Tested according to EN 14785 in accordance with European regulation for Construction Products (EU 305/2011).