MCZ Cap NATURAL - Manual (Page 32)

q
p
A/C
A/C
p
p
30
5-DISASSEMBLING TRAY STOVE
• Push piece “p” downwards (use a screwdriver to press it down if necessary), so that the hooks of panels of panels “A” and “C” can
come out of the slots of piece “p” (see figure below). There is no need to fully remove clip “p” from the structure”.
Attention!! As well as to fix panels “A” and “C”, clip “p” is necessary to adjust the joint of panels “A” and “C” at the top
and bottom of the middle section.