MCZ Cap NATURAL - Manual (Page 45)

z
J
K
G
43
7-LAM STOVE DISASSEMBLY
Technical Dept. - All rights reserved - Reproduction is prohibited
ASSEMBLY OF SIDE MESH PANEL
This is the only part that is delivered together with the structure, but not assembled.
Take the side "G" and move it close to the structure and let the two lower hooks "K" and the two intermediate hooks "J" enter the structure.
Then tighten the two upper screws "z" to securely fasten the panel to the structure. Repeat the same operation for both panels.
Attention!!
If you have purchased an accessory kit (e.g. ventilation kit, web interface, etc.) it is recommended to install the
accessories and then the side panels.