Disassembling cap stove – MCZ Cap NATURAL User Manual
Page 42

q
r
r
x
x
40
6-DISASSEMBLING CAP STOVE
•
remove the four screws “q” found at the top of the door opening
•
remove the three screws “r” on the side (three for the right hand side panel and three on the left) which lock the panel to the structure
Attention!! Before removing screws “r” the two side panels must have been removed.
When reassembling the front panel be very careful to ensure the rubber strip “x” rests onto the panel. Do not over-
tighten the screws because it might affect the joint with the side panel.
This manual is related to the following products: