MCZ Cap NATURAL - Manual (Page 49)

w
k
k
w k
47
8-LOADING THE PELLETS
Technical Dept. - All rights reserved - Reproduction is prohibited
LOADING THE PELLETS
The fuel is loaded at the top of the stove by lifting door “k” by its rubber handle.
Pour the pellets in slowly so that it is deposited at the bottom of the hopper. The door has two opening modes, one to load the pellet and
the other to clean the top inside part of the stove with a vacuum cleaner as needed. A grid “w” has been fitted at the first door opening
step to prevent the pellet from escaping to the front of the stove. Inside the stove the word “MAX” can be seen on one side, indicating the
maximum level of the pellet before it spills between the panels and the structure of the stove.
Never remove the protection grid inside the hopper. When loading, do not let the pellet bag come into contact with
hot surfaces.
No other type of fuel other than pellets is to be inserted into the hopper, in compliance with above-mentioned
specifications. Store the spare fuel at an adequate safe distance.
Do not pour pellets directly onto the brazier but only into the hopper.
Most of the stove surfaces are very hot (door, handle, glass, smoke outlet pipes, hopper door etc.), therefore it is
recommended to avoid coming into contact with these parts without appropriate protective clothing.