Epson B 510DN - Manual (Page 162)

Chapter 9
Using the Printer on a Network
Setting Up the Printer on a Network
This printer can connect anywhere on your network using 10Base-T or 100Base-TX because it has a
built-in Ethernet interface that supports the TCP/IP protocol.
You can make the network interface settings such as IP address by using the printer’s control panel, or
the applications for your computer.
Using the printer’s control panel
& See “Network setting menu” on page 128.
& See also “How to access the control panel menus” on page 124.
Using the utilities for your computer
& See the network guide in the CD-ROM.
Note:
❏ To find the supported OS versions for the printer, see the following section.
& See “Operating System Versions” on page 10.
❏ Be aware that NetWare is not supported.
❏ Be aware that the protocols AppleTalk, NetBEUI, WSD, and LLTD are not supported.
❏ To find the bundled utilities, see the CD-ROM shipped with your printer.
❏ To get more information, see the following section.
& See “Where To Get Help” on page 191.
Setting Up the Printer as the Shared Printer for Windows
These instructions tell you how to set up your printer so users on the network can share it.
B-310N/B-510DN User’s Guide
Using the Printer on a Network 162